Thu, 23 Apr 2026 07:35:08 +0000 https://seatbeltspecialist.com/ Tue, 21 Apr 2026 15:49:20 +0000 Automatic 2-point seat belt / safety belt. This 2-point belt features a closed cassette, which deviates from the E-certificate, meaning this belt does not have an E-mark. It is suitable for installation in wheelchairs, cargo bikes, or classic cars where seat belts are not mandatory.

The operation of an automatic 2-point belt is different from that of an automatic 3-point belt. The automatic 2-point belt locks immediately when the tension on the belt strap is released. To extend the belt further, it must first be retracted. The automatic 2-point belt is not suitable for a sprung base, because the belt tightens when the suspension compresses. In the case of a sprung surface, we recommend using a static lap belt.

Specifications:
Male side length: 1.20m
Female side length: 23 cm
Band width: 4.8cm
Metal tongue width: 21mm
Color: Black
Certification: Cassette deviates from certificate, causing E-mark to become invalid
Category: Wheelchair or vehicles not subject to seatbelt requirement

2-Point Seatbelt customization:
Customization is also possible (the length of the male or female side can be specified). Email us the lengths you require. Please note that this will result in a longer delivery time, and we charge an additional 15 euros for this custom work. Please contact us via the contact form and provide the article number and the correct lengths. You can also indicate that it is a custom order when placing your order; please specify the required lengths in the description. We will then provide an estimated delivery time.]]> Tue, 14 Apr 2026 11:04:56 +0000 NOTE: basic price is without receiver, discount bundles complete set are at the bottom of this page 
Determining the correct belt length:​​​​​​​


Specifications: 
Type: 3-point belt automatic 
Material: polyester / steel 
Buckle: 3mm thick  
Belt strap length: 2,95 meters 
Receiver length: various lengths available, from 22 cm to 46 cm 
Total length: 3.00 meters (~ 0,58 meter belt strap is outside the cassette) 
Belt strap color: black - 46-48 mm wide 
Metal tongue: 21 mm wide (can be combined with receiver Type A) 
Automatic: yes 
Mandatory mounting angle: 90 ° (see manual) 

Note: montageoog 12mm, without a thread 

Quality mark: E24 (belt is provided with sewn-on label to the belt band)
Vehicle category: M1, M2, M2, N1 and N2 
Suitable for: General use 
Suitable for positions: LV (driver), RV (co-driver), LA and RA (rear seat, outer rear seats)  

This seat belt / 3 point belt is E24 approved and highly easy to install yourself. A 3-point safety belt is a complete belt as we know it today. Due to the E24 quality mark, this belt can and may be installed in cars, trucks, campers, electric vehicles, etc. according to the rules in the Netherlands.  

SCROLL DOWN FOR THE BUNDLE WITH RECEIVER 

NOTE: 
This 3-point belt must be placed VERTICAL (in a 90 ° position). You can use this belt if your original belt does not have any electronic connections (eg with the Airbag in your door pillar). If your original belt is equipped with electronic connections or a gas cartridge, the belt replacement can be a solution for you. More information about the option can be found here on our site. 

Customization: 
We can also provide customization. A lot is possible (male or female lace can be specified in length). Mail us the lengths you need. Take into account a longer delivery time. With a custom order, € 15.00 is charged in custom work surcharge and a custom product can no longer be returned. 

Do you have questions or a customized wish? Please contact us through the various contact options. We would like to receive the desired product and the desired lengths. We will then give you an estimate of the delivery time. ]]> Wed, 08 Apr 2026 14:04:47 +0000 DELIVERY TIME normal +/- 2 working days

This receiver is Type B, suitable for a 25mm tongue.

Total length: 11,2 CM
Mounting eye dimensions: 2.4 cm x 0.8 cm
Suitable for the 25 mm buckle
Alarm: none

Type approval: none
Vehicle category: wheelchair or non-belt mandatory vehicles
Suitable for: general use

It also fits many original seatbelts. Type B (up to 25mm width fits in here).

Please note: This is not an extender, but is installed in place of your original receiver. Technical specifications TYPE B
If the metal part is narrower than 25 mm, this receiver will fit. PLEASE NOTE: If your original belt (metal part that clicks into the “receiver”) is wider than 25 mm, it will not fit!]]> Mon, 23 Mar 2026 13:19:08 +0000 DELIVERY TIME normal +/- 2 working days

This receiver is Type A, suitable for a 21mm buckle.

Total length: 13 CM
Mounting eye dimensions: 2.4 cm x 0.8 cm
Suitable for the 21/22mm buckle
Minimum length of the buckle (straight part of the seatbelt): 3.2 cm
Alarm: none

Type approval: E24 ECE 16R
Vehicle category: M1, M2, M3, N1 and N2
Suitable for: general use
Suitable for positions: all

It also fits many original seatbelts. Type A (up to 22mm width fits in here).

Please note: This is not an extender, but is installed in place of your original receiver. Technical specifications TYPE A
If the metal part is narrower than 22 mm, this receiver will fit. PLEASE NOTE: If your original belt (metal part that clicks into the “receiver”) is wider than 22 mm, it will not fit!]]> Mon, 23 Mar 2026 12:59:08 +0000
Dimensions:
Thickness: 1 mm
Height: 6.1 cm
Width: 8.4 cm (widest part)
Eye: Ø14.0mm

Material: steel with plastic coating
Cover cap material: plastic]]> Mon, 23 Mar 2026 12:38:21 +0000 DELIVERY TIME normal +/- 2 working days 

This receiver is of Type A and suitable for the 21mm tongue. 

Total length: 15.7 cm or 13 CM 
Diameter mounting eye: 14 mm 
Suitable for the 21 / 22mm buckle 
Minimum tongue length (straight part of the belt tongue): 3.2 cm
Alarm: OFF (NO connection - MAKE contact)

Type approval: E8 ECE 16R
Vehicle category: M3
Suitable for: general use

It also fits many original seat belts. Type A (up to 22mm wide fits here).

Note: This is not an extender, but instead of your original receiver. 

Technical specifications TYPE A 
When the metal part is narrower or 22 mm, this receiver will fit. NOTE: If your original belt (metal part that clicks into the “receiver”) is wider than 22 mm, it will not fit! ]]> Fri, 20 Mar 2026 10:31:06 +0000 Want to know what length belt you need? For instructions, see "Frequently asked questions"

Please note: This is only the seatbelt. Combination with receiver you can find down below.

3-Point Seatbelt / Safetybelt / Mobile Home Seatbelt. 4 meters

Determining the correct belt length:​​​​​​​


NOTE: basic price is without receiver, discount bundles complete set are at the bottom of this page 

Specifications: 
Type: 3-point belt automatic
Color: Yellow
Material: polyester / steel 
Buckle: 3mm thick  
Belt strap length: 3,95 meters 
Receiver length: various lengths available, from 22 cm to 46 cm 
Total length: 4.00 meters (~ 150 meter belt strap is outside the cassette) 
Belt strap color: black - 46-48 mm wide 
Metal tongue: 21 mm wide (can be combined with receiver Type A) 
Automatic: yes 
Mandatory mounting angle: 90 ° (see manual) 

Note: montageoog 12mm, without a thread 

Quality mark: E24 (belt is provided with sewn-on label to the belt band)
Vehicle category: M1, M2, M2, N1 and N2 
Suitable for: General use 
Suitable for positions: LV (driver), RV (co-driver), LA and RA (rear seat, outer rear seats)  

This seat belt / 3 point belt is E24 approved and highly easy to install yourself. A 3-point safety belt is a complete belt as we know it today. Due to the E24 quality mark, this belt can and may be installed in cars, trucks, campers, electric vehicles, etc. according to the rules in the Netherlands.  

SCROLL DOWN FOR THE BUNDLE WITH RECEIVER 

NOTE: 
This 3-point belt must be placed VERTICAL (in a 90 ° position). You can use this belt if your original belt does not have any electronic connections (eg with the Airbag in your door pillar). If your original belt is equipped with electronic connections or a gas cartridge, the belt replacement can be a solution for you. More information about the option can be found here on our site. 

Customization: 
We can also provide customization. A lot is possible (male or female lace can be specified in length). Mail us the lengths you need. Take into account a longer delivery time. With a custom order, € 15.00 is charged in custom work surcharge and a custom product can no longer be returned. 

Do you have questions or a customized wish? Please contact us through the various contact options. We would like to receive the desired product and the desired lengths. We will then give you an estimate of the delivery time. ]]> Fri, 20 Feb 2026 13:11:40 +0000 Fall protection, 2 point belt - without quality mark. This belt has the effect of a 3 point belt, it only blocks in case of hard action.  

Type A (21mm) Specifications: 
Type: 2-point belt automatic - without quality mark 
Material: polyester/steel 
Length belt strap: 2.40 meters 
Color belt strap: black 
Metal tongue: 21mm wide 
Automatic: yes 
Quality mark: NONE 
No mandatory mounting angle: 360°  
Shoulder mounting point: no 


Customization: 
We can also provide custom work. A lot is possible (male or female side can be specified in length). Email us the lengths you need. Please take into account a longer delivery time. For a custom order, a € 15.00 customization surcharge will be charged and a custom product can no longer be returned.  

Do you have questions or a customization request? Please contact us via the various contact options. We would like to receive the desired product and the desired lengths. We will then give you an estimate of the delivery time.]]> Fri, 16 Jan 2026 12:23:43 +0000 DELIVERY TIME normal +/- 2 working days 

This receiver is of Type A and suitable for the 21mm tongue. 

Total length: 15.7 cm or 13 CM 
Diameter mounting eye: 14 mm 
Suitable for the 21 / 22mm buckle 
Minimum tongue length (straight part of the belt tongue): 3.2 cm
Alarm: NC connection - BREAK contact

Type approval: E8 ECE 16R
Vehicle category: M3
Suitable for: general use

It also fits many original seat belts. Type A (up to 22mm wide fits here).

Note: This is not an extender, but instead of your original receiver. 

Technical specifications TYPE A 
When the metal part is narrower or 22 mm, this receiver will fit. NOTE: If your original belt (metal part that clicks into the “receiver”) is wider than 22 mm, it will not fit! ]]> Mon, 29 Dec 2025 14:17:49 +0000 DELIVERY TIME normal +/- 2 working days 

This receiver is of Type B and suitable for the 25mm wide metal belt buckle (tongue of the buckle). 

Total length: 13 cm
Diameter mounting eye: 12 mm
Suitable for the 25 mm buckle
Minimum tongue length (straight part of the belt buckle): 3.2 cm
Category: wheelchair or vehicles that do not require seat belts

Note: This is not an extender, but instead of an original receiver. 


Technical specifications TYPE B 
When the metal part is narrower or 25 mm, this receiver will fit. ATTENTION: If your original belt (metal part that clicks into the “receiver”) is wider than 25 mm, it will not fit! ]]> Mon, 29 Dec 2025 11:10:23 +0000 DELIVERY TIME normal +/- 2 working days 

This receiver is of Type B and suitable for the 25mm wide metal belt buckle (tongue of the buckle). 

Total length: 12 cm
Diameter mounting eye: 12 mm
Suitable for the 25 mm buckle
Minimum tongue length (straight part of the belt buckle): 3.2 cm
Category: wheelchair or vehicles that do not require seat belts

Note: This is not an extender, but instead of an original receiver. 


Technical specifications TYPE B 
When the metal part is narrower or 25 mm, this receiver will fit. ATTENTION: If your original belt (metal part that clicks into the “receiver”) is wider than 25 mm, it will not fit! ]]> Tue, 23 Dec 2025 10:24:44 +0000 DELIVERY TIME normal +/- 2 working days 

This receiver is of Type A and suitable for the 21mm tongue. 

Total length: 15,7 CM 
Diameter mounting eye: 11,5 mm 
Suitable for the 21 / 22mm buckle
Minimum tongue length (straight part of the belt buckle): 3.2 cm

Type approval: none
Vehicle category: -
Suitable for: general use

It also fits many original seat belts. Type A (up to 22mm wide fits here).

Note: This is not an extender, but instead of your original receiver. 

Technical specifications TYPE A 
When the metal part is narrower or 22 mm, this receiver will fit. NOTE: If your original belt (metal part that clicks into the “receiver”) is wider than 22 mm, it will not fit! ]]> Fri, 19 Dec 2025 09:21:17 +0000 The belt is equipped with a quick closure, the belt is easy to adjust to the right size.

This safety belt / 4 point sport racing belt has an E13 quality mark.

Length (total): adjustable
Extreme length shoulder strap: 126 cm
Extreme length hip strap: minimum length 60 cm (1 adjustment buckle) to 138 cm (2 adjustable buckles)
Strap width: 4.8 cm
Color: bright pink
Metal tongue width: 21 mm wide
Qualitymark: E13 (belt has a stitched label on the belt strap)
Category: M2, M3]]> Mon, 08 Dec 2025 12:19:25 +0000
The optional cover provides comfort so that the tire does not cut. We do not use cheap plastic closures, but solid, durable closures that are indestructible.
At the bottom of the product page you will find the bundle with cover. 

Closure: seat belt closure
Strap length: 2.5 meters
Colour: bright pink

APPLICATION: 
This traction belt or fixation/mobilization belt can be used for all types of mobility techniques, patient stability, transfers, stretching and physiotherapy. It is a portable item, thanks to its compact size and light weight you can easily carry and store it, take it with you on home visits 

ADJUSTING THE BELT: 
Pull the traction belt around the waist and wrap the other end around the injured part of the patient, it is easy to adjust by means of the adjustment in the buckle and can be unlocked with one hand if necessary. 

QUALITY: 
We only use the highest quality nylon for our belts as well as the traction/fixation belt, this ensures that it is safe. A separate cover can be ordered to add comfort for sensitive areas e.g. shoulders or hips. ]]> Mon, 08 Dec 2025 12:07:56 +0000