Can be used for a seatbelt.
Strength class : 8.8
Thread: 7/16
thread length: 35 mm (total length 55mm incl. head, 45mm without head)
- 7/16 UNF Grade 8.8 with 14mm head -
This concerns a set consisting of the bolt (thread length 14 mm) and the nut
(the spring washer does not need to be used at the shoulder mounting point; the shoulder mounting point must be able to move freely).
*********
The torque of an M11\*1.25 fastener is 48 N.m.
Explanation:
- M11: This indicates the fastener is metric and has a nominal diameter of 11 millimeters.
- 1.25: This represents the pitch, or the distance between each thread.
- 48 N.m: This is the tightening torque, which is the force required to properly tighten the fastener. It's measured in Newton-meters.
In summary, the torque value of 48 N.m is the recommended force to tighten an M11 fastener with a 1.25 pitch.