Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D
Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D Autogordel receiver / veiligheidsgordel receiver 14 - Type D
Belt receiver 14 Type D (26 tot 35 mm)
0 Review | Add review
Receiver for seat belt tongue with a wide of 21 until 26mm, wider at the top up to max. 35mm.

Shipping costs

€ 6,95

€ 14,95

Stock : 2

Quantity: 
Order
 
DELIVERY TIME normal +/- 2 working days 

This receiver is of Type D and suitable for the 21 to 26mm wide metal belt buckle (tongue of the buckle), which is wider at the top (up to max. 35mm). 

Total length is: ~ 30 cm 
Diameter mounting eye: 11.5 mm 
Suitable for the 21 to 26 mm belt buckle, this buckle is wider at the top (up to 35 mm) 
Category: wheelchair or vehicles that do not require belting 


Note: This is not an extender but instead of an original receiver. 

Technical specifications TYPE D 
When the metal part is narrower or 26 mm, this receiver will fit, with the top tapering out to max. 35 mm ..
ATTENTION: If the original belt buckle (metal part that clicks into the “receiver”) is wider than 26mm at the bottom, it will not fit! 

Order by:

Add review

No reviews found.